Elektralite Variable White Dazer Manual de usuario descargar pdf (Pagina 5)

6. Menus in the fixture.

Root Menu Sub Menu 1 Sub Menu 2

STAT (STATIC LOOK) W(HITE) 0-255

A(mber) 0-255

S(STROBE) 0-255

RUN DMX

SLAV(E)

DMX ASSIGN DMX CHANNEL 1-512

PERS (PERSONALITY) W.A

MA.d

MA.S

WS Id

ID ID 01 THROUGH 255 1-255

SET REST (RESET)

DIM

KEY OFF

7. Static Look.

The Elektralite VW Dazer can be set to a single static look quickly.

Use the Menu button to get to STAT.

Press Enter.

The next screen will read W.000. This is addressing the White leds.

Use the

↑ or ↓ to increase

or decrease the output of the leds.

Numbers are expressed in DMX values so 0 is no output and 255 is highest output.

Press Enter to save the value.

The screen will automatically advance to the strobe. S.000 means the strobe is off

Use the

↑ or↓ to

increase or decrease the speed of the strobing or leave at S.000 if you want no strobe.

S.001 is the slowest and S.020 is the fastest strobing.

Press Enter to save the value. It will automatically bring you back to the output screen again.

Press the Menu button to exit out of STAT and back to the Root directory.

8. Run Mode.

Run allows the Elektralite VW Dazer to operate in either DMX or Slave operation.

Using the Menu button in the root menu go to RUN.

Press Enter to get to DMX mode. Press Enter again to save the RUN mode as DMX.

A "ok" will appear and then the display will return to display RUN.

If the fixture is to be run in Slave mode, then when DMX mode appears on the screen instead of

pressing enter use the ↑ or ↓ to get to SLAV. Then press enter to save the SLAV mode setting.

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

Elektralite Variable White Dazer Manual de usuario Pagina 5