Elektralite P100 Manual Part Two Manual de usuario descargar pdf (Pagina 49)

121

SET UP

FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES

1. Turn the controller on Turn switch on. The switch is Also at this time,

***please

located on the rear panel.

TURN ON SOLO

****and

make sure the Grand Master fader

is up and DBO is off

2. Set up Fixtures ADD FIXTURE ENTER If a fixture number other than 1 appears

on the screen, this is the next available

"open" fixture number. To empty

memory see DELETE .

3. Choose Fixture Type Use ^ or v keys to move cursor to Use YES or NO keys to select

[type:" "] the fixture

4. Add the fixture to the show Press F1 This brings up a screen called the

EDIT FIXTURE MENU.

5. Naming the fixture. Use ^ or v keys to move cursor to Use keyboard to type in your

[Name:" "] personal name. (stage left light 1).

6. Selecting the DMX port. Use ^ or v keys to move cursor to Use YES ot NO keys to You’ve got 2 x 5 pin XLRs on the

[DMX Port:" "] select port 1 or 2. back of the

CP-100

marked

out 1

and

out 2.

These are your DMX ports.

7. To change DMX channel Use > key to change from Use the number buttons and then The controller will automatically

address [DMX Port" "] to press ENTER . default to the next unused DMX

[Base Channel:" "]. channel address, called the

"Base Channel" (or start channel).

8. To Change Dimmer Port Use > key to change from Base Use the YES or NO keys to Having access to changing the dimmer

channel to dimmer port change between ports 1 or 2 port is

only

available if the fixture

supports a DMX changeable dimmer.

For example, Vari*lite VL5.

9. To Change Dimmer Channel Use > key to change from dimmer Use the number buttons and then Like the dimmer port, access to this

port to dimmer channel press ENTER is

only

available if the fixture

supports a DMX changeable dimmer.

10.To Change default settings Use > key to change from Use > to change from Unless you need to switch/invert the

for Pan and/or Tilt [Base Channel:" "] to Pan Pan to Tilt and then onto Pan or Tilt functions these need not

Pan/Tilt invert. be changed.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 79 80

Comentarios a estos manuales

Sin comentarios

Elektralite P100 Manual Part Two Manual de usuario Pagina 49

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Elektralite P100 Manual Part Two