Elektralite P100 Manual Part Two Manual de usuario descargar pdf (Pagina 55)

127

Fp being 2 .Any feature which is

part of the Fp is shown by the letter (F)

being displayed beside that fixture.

You can also attach a Fp to a group of

fixtures. This requires you to substitute

the word GROUP "n" instead of

FIXTURE "n" in the first button seq.

6. Attaching a second Fp. Press ADD FEATURE PRESET It is common to attach a second Fp to a

"n" TO FIXTURE "n" ENTER fixture. The first feature Fp could be for

color while the second could be for

gobo.

STORING A CUE.

FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES

1. To store a cue Press STORE CUE "n" ENTER Having moved the fixtures & dimmers

to the position you wish to record.

Pressing the first button sequence

"locks your lighting look into the

board".

2. To look at the cues you have Press CUE ENTER You are now in the Cue Editor.

stored in the board (not out on To see the fixtures that are in a cue

stage! See 4 & 5 below). press fixture "n" enter. The cue editor

shows any presets attached to the cue.

Fixture and Dimmer filters are a way of

simply taking fixtures or dimmers

out

of the cue.

STORING A CUE

(continued)

FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES

3. To add a fade time to a cue Use the ^ or v keys to get to Press the number keys followed by The maximum time is 100,000seconds!

[In time: " "] or [Out time: " "] ENTER. Then press STORE CUE The "in time" is the time taken for the

ENTER. cue to "fade in". The out time is the

time taken for the cue to "fade out".

You can quickly adjust the time of a

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 79 80

Sin comentarios

Elektralite P100 Manual Part Two Manual de usuario Pagina 55