Elektralite P100 Manual Part Two Manual de usuario descargar pdf (Pagina 52)

124

1. First get yourself into the Press FIXTURE ENTER You need to either go to the fixture

Fixture Features Screen you want to store as a preset, or

a fixture group. Please see "SET UP"

for individual fixture or fixture group

for group of fixtures.

2. Clear Everything to start from Press CLEAR ALL This takes all dimmer values to Zero

the beginning. (these are HTP channels).All other

channels are also cleared out of the

buffer memory. However remember

because they are LTP channels the

fixtures remain in their Last Position.

It is important to understand the

concept of clear

. Please see

Tips

Hints, and

other “Good Things”

for info on Presets & feature presets.

3. Hi-lite theFixtures you want Press HI-LITE FIXTURE "n" This is a "trick". It will open your

in the preset. ENTER dimmer but won't record that into

the preset. The fixture feature display

has an

at the top right hand side

to tell you, you've hi-lited the fixture.

4. Move the Fixtures into the focus Press FIXTURE "n" ENTER Use the rotaries to position fixture Once you have got the first fixture in

position that you want to record position you can move to the second

and so on. Caution if you move a

rotary with a feature that you do not

want recorded in the preset you must

clear that rotary by pressing

CLEAR

ROTARY NUMBER ENTER

STORING A PRESET

(continued)

FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES

5.Storing the Preset Press STORE PRESET "n" You can use any number from 1 to

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 79 80

Sin comentarios

Elektralite P100 Manual Part Two Manual de usuario Pagina 52